Description
Quickly install your perimeter protection!
The pre-assembled MPT turnstile enables you to speed up your customers’ processes – and at the same time save valuable time and personnel when installing the perimeter protection. The turnstile is delivered to you in a fully prepared state ready for installation at the deployment site. All of the components have already been assembled on the base frame. You only need to connect the frame to the substructure, connect up the electrics and access control system and finish the flooring. Your turnstile is then ready to use! Moreover, you can also offer this turnstile variant as a mobile access control solution. In combination with a suitable walkway surface, you can use it to secure building sites or temporary event locations for your customers or to enhance existing security measures.
The fully assembled MPT can be transported in the warehouse or at the deployment site using a forklift truck. As with Euro Pallets, the driver simply inserts the fork arms into the pre-mounted lifting slots to lift up the turnstile. The pre-assembled MPT can be equipped with all options and accessories. These items are installed on-site.
- Quick commissioning process: The MPT is delivered in a fully assembled state on a base frame and only needs to be connected up and fixed in place at the deployment site. This saves you valuable time and personnel.
- Mobile/temporary use: In combination with a suitable walkway surface, you can also use this turnstile as a mobile unit for the installation of temporary access controls – ideal for building sites, outdoor events and short-term security measures.
- An entrance and exit: You can use the turnstile as both an entrance and exit simultaneously.
- For single-file access: MPT turnstiles are the ideal solution for securing external areas with a high number of visitors. Numerous options are available for your access control solutions.
DOCUMENTATION
MPT3xF Turnstile Preassembled on Frame – Data Sheet
FURAT3 Foundation Frame – Data Sheet
STANDARD FEATURES
- MPT33C-C300G Full Height Single Turnstile
- Turnstile Foundation Frame (for installing over pavers, gravel, or setting frame into concrete)
- Factory pre-assembly, 4* Lifting lugs and packaging
- Electromechanical, Bidirectional
- Option to lock or spin freely on power outages
- 3-Wing Configuration
- Fully Powder Coated (RAL 7042 or a custom color)
- Dimensions: 60 x 59 x 88 inches
- Weight: Approx. 751 lbs
- Designed for 10 million opening and closing cycles
- Quick and easy installation thanks to the pre-assembled delivery direct from the factory
- The customer can place a walkway surface on top of the lifting slots
- Adjustable lifting slots to fit the forklift truck and conditions at the deployment site
- Reliable security for external areas and open-air grounds with a high number of visitors
ACCESSORIES
- MAENT101: Bi-Directional or Uni-Directional Key Override (manual key locks each direction independently)
- a. This is a physical key lock mounted onto the bottom of the header with a cam/lock mechanism that LOCKS the turnstile in one direction – completely disables that passageway’s rotation (in that one direction).
- b. When the same lock is “UNLOCKED”, the turnstile reverts to whatever mode it normally is in. Meaning the turnstile, for that direction, if controlled by an access system, will go back to operating only when it gets a command from the access system. If the turnstile, for that direction however, is set to “free spin” under normal operation, then when the key is turned to the UNLOCKED position, the turnstile will free spin in that direction.
- c. You’d need two key locks (MAENT101) to be able to LOCK or UNLOCK both directions of rotation.
- PULT01/PULT02: Push-Button Remote Controls, Hardwired Desk Panel
- The alternative to MAENT101 is to use our hardwired “desktop” control switch (PULT01) to allow free rotation in either direction.
- When you use the PULT01 for the MPT, the way it operates by just 2 push-buttons.
- The MPT doesn`t have “modes” like the rest of our pedestrian gates – it is just ‘Open Left’ and ‘Open Right’, one time with a pulse activation of the switch.
- If you want “FREE” rotation for a period of time, you’d just keep the ‘Open Left’/’Open Right’ input always enabled (switch on PULT01 = ON).
DRAWING & DIMENSIONS
INSTALLATION
TURNSTILES.us Installation Services are Available! Contact us. > See our portfolio of work Here
*Please note: Freight is not included and will be billed separately.
Worldwide freight services are available.
