Description
Unlock the power of the sun with the SolaTurn FLASH4 Solar Power Package! This comprehensive kit includes four high-efficiency solar panels, designed specifically for outdoor industrial applications. Whether you’re powering remote card readers, turnstiles, ADA gates, or vehicle barrier gates, the FLASH4 package provides a reliable energy solution where traditional power sources are unavailable.
Data Sheet and Materials List with Full Documentation
Sample Application:
AutoCAD Schematic: Solar-Powered Rally Station with Card Reader
FEATURES
- Convenient Solar Power Kit
- Outdoor Industrial Grade
- Provides Solar Power for a variety of applications:
- Card Readers (for example on a gate in a faraway location)
- Turnstiles (portable or stationary in a location without access to power)
- ADA Gates (operate portable or stationary gates wherever necessary)
- Vehicle Barrier Gates (power electric gates at the end of a driveway without power access)
- These are only a few of the uses for this kit, expandable by adding batteries, etc.
COMPONENTS
- (4) Solar Panel Modules – REC Solar, Alpha PURE Series 390W PV Module, 132 half-cut Bifacial heterojunction cells, Vmp: 40.6,Imp: 9.61, Voc: 48.4, Isc: 10.38, 71.7″ x 40″ x 1.2 (30mm), 45 lbs each.
- (1) Inverter – Victron MultiPlus inverter & charger. 2000 Watts, 24 Volts DC, 120 Volts AC, 50 Amp charger, VE.Bus. Article code: PMP242200100
- (1) Charge Controller – Victron SmartSolar MPPT 250/60-Tr solar charge controller. 12, 24, 36, 48 volts DC, 60 Amps max. Article code: SCC125060221
- (2) Battery – Discover DLP AES Professional 1.5kWh 25.6V 60AH with heating, on/off Key, LYNK COMM PORT. 10.2″ x 7.1″ x 10.1″, 30.7 lbs.
- (1) Solar Battery Box – Ameresco Solar BBA-6 , holds 6 group 27 batteries, NEMA 3R,4 and 4X. 40.12″ x 25.25″ x 17.125, 61 lbs.
- (2) End Clamp for PGRM Panel Mount. Made for 3″ SCH40 pipe
- (2) Mid Clamp for PGRM Panel Mount. Made for 3″ SCH40 pipe
- (1) True DC Solar Isolator – IMO SI32-PEL64R-4, Enclosed DC Switch IP66
- (1) Heyco Strain Relief – 1/2 in 1000V. Accepts two 6mm PV wires. Nut is included.
- (1) MidNite DC – Solar surge protector for DC circuits. Rated for 300 volts DC nominal and 250 volts AC nominal.
- (1) MidNite AC – Solar surge protector for AC circuits. Rated for 250 volts AC nominal and 300 volts DC nominal.
- (1) LYNK LITE Communication Gateway – Discover Energy Systems 950-0040 intended to work with Discover DLP AES Professional Batteries.
- (1) MC4 Solarline 2 (latching) Extender Cable – 10 AWG, 50 ft, Male to Female, 2kV single jacket 1kV rated connectors.
- (1) Circuit Breaker 100 amp –Bussmann MRCB breaker 100 amp – DC 12-48 volts w/switch
- (1) Circuit Breaker 150 amp –Bussmann MRCB breaker 150 amp – DC 12-48 volts w/switch
- (12ft) Black Cable – #2 AWG UL MTW CABLE, Stranded Copper Wire
- (12ft) Red Cable – #2 AWG UL MTW CABLE, Stranded Copper Wire
- (4) Stud Ring Connector #2 x 5/16″ – tinned copper
- (10) Stud Ring Connector #2 x 3/8″ – tinned copper
- (4) Black Heat Shrink – for #4 AWG, 1.5 inch long.
- (8) Red Heat Shrink – for #4 AWG, 1.5 inch long.
- (3) RJ45 UTP Cable 0.9 m – Network cable for VE.Can, VE.Bus, VE.net. Aritcle code: ASS030064920
- (1) Interface MK3-USB – VE. Bus to USB. Article code: ASS030140000
- (1) Cerbo S-GX Communication Hub – Remote monitoring device for solar powered system. Dimensions: 6.07″ x 3.08″ x 1.9″ Article code: BPP900450120
- (1) T-Connector – Discover DLP CONNECTOR KIT 0.4M CABLE + T -DLP 0.4M cable + battery T connector kit.
- (1) Battery Interconnect Network Cable – Discover DLP COMM CABLE 25’/7.6M NEMA (HOMERUN) – DLP 7.6m
- (1) Labor – Electrical work to prewire the components in the enclosure.
*For WiFi communication with an access control system, add the Wireless Bridge Kit: (1) EnGenius Station6 and (1) EnGenius8-Port Switch
*For Card Reader Access Control, add BOTH the Wireless Bridge Kit and the Card Access Kit: (2) HID 6005 Proximity Card Readers (1) KT2 (2) RBSN (1) Cable
