Description
Our Full Height ADA Gate with Mesh is engineered to meet the most demanding security and control requirements. Paired with our HS400 series full-height turnstiles, they provide ADA accommodation to any project. Crafted from tubular steel or meshed with a push bar for free-exit projects, the HS336 completes any access control job.
These units are available in your choice of galvanized or powder-coated carbon steel or stainless steel (304 or 316 for extra corrosive resistance) finishes, matching your turnstile array.
Data Sheet – HS336 / HS348 ADA Gate
Installation Manual – HS336 / HS348 ADA Gate
Production Sheet – ADA Swing Gate *Required Form: Please email with your Order
FEATURES
Standard Hardware
Mesh: Security Steel Mesh Weave prevents any breach
Door Closer: Locinox Mammoth 180 or Norton 9300 Series
Deadlock: Adams Rite 4510 Series with 31/32″ backset
Strike: Adams Rite 7100 Series electronic strike – 24VDC
Cylinder: Mortise Cylinder
APPLICATION/USE
- Interior OR Exterior Use
 - HS336-ADA Model: Self-closing heavy duty swing gate provides wheelchair accessible 36” passage (with an overall width of 43.375”)
 - HS348-ADA Model: Self-closing heavy duty swing gate provides wheelchair accessible 48” passage (with an overall width of 55.375”)
 - Reversible electronic strike can be set to lock or open on power failure
 - Gate can also be unlocked with no power by configuring the strike to fail lock by using a key
 - Gate automatically swings closed with a standard hydraulic door closer
 - Voltage for the electronic strike can be taken from a nearby turnstile power supply
 - When the HS400 Series Full Height Security turnstile is “Free Exit”, the HS336-ADA & HS348-ADA swing gate should also be free exit
 
OPTIONS FOR THE HS336-ADA & HS348-ADA
- Panic Bar Hardware – Latch Paddle – Adds a latch paddle to the exit side of the gate for free passage (mesh models only)
 - Panic Bar Hardware – Full Panic Bar – Adds a panic bar to the exit side of the gate for free passage (mesh models only)
 - Panic Bar Upgrade – Signal Monitoring Switch – Adds a SPDT switch to mirror panic bar status with wire transfer kit to feed wires from door to frame
 - Panic Bar Upgrade – Battery Powered Alarm
 - Motorized Door Opener – Adds 3” to overall height of door
 - Magnetic Lock – Can replace the strike lock if requested
 - Card Reader Mounting Plate/Enclosure (1 per electronic direction) – For mounting most standard card readers
 - Request to Exit ADA Placard Button with Plastic Surface Mount Enclosure – Rectangular or round
 - Single Push Button (installed on-site)
 - One Channel 900 MHz Wireless Receiver (one per direction) – Must be mounted remotely
 - Wireless Key Fob Transmitter (1 button)
 - 24 Volt Power Supply (if being used electronically and not purchased with a turnstile)
 - Custom Passage Widths – Call for quote
 - Powder Coating Over Galvanizing Upgrade
 - 316 Stainless Steel Upgrade – Standard is 304 Stainless
 - This door is also available with Vertical Steel Bars
 
FINISH CHOICES

- Carbon Steel – Galvanized (GALV)
 - Carbon Steel – Powder Coated (PC) **Indoor installations
 - Carbon Steel – Powder Coated over Galvanized (POG) **Select this if Outdoors! Increased weatherization from POG.
 - Stainless Steel/Satin Finish (304):
Ideal for food service, manufacturing, hospitality, anywhere that aesthetics are important - Stainless Steel/Satin Finish (316):
Ideal for coastal areas, marine applications, areas exposed to corrosive chemicals and/or chloride (de-icing salts) 
DRAWINGS & DIMENSIONS
- HS336-ADA-MS – Dimension Drawing
 - HS336-ADA-MS – ABCD Anchor, Base, Conduit Detail
 - HS348-ADA-MS – Dimension Drawing
 - HS348-ADA-MS – ABCD Anchor, Base, Conduit Detail
 
INSTALLATION PHOTOS
Above: Tandem Turnstile, two HS336-ADA Gates with Mesh, and Matching Climbover Filler Barriers to fill the space above the turnstile and gate to the ceiling.
Above: Tandem Turnstiles, HS348-ADA Gate with Mesh, Galvanized
Above: HS448-Single Turnstile, HS348-ADA Gate with Mesh, Stainless Steel
				





















